Wacom Intuos Tablet Fix

Ran into an issue tonight where Windows 7 did not recognize that my Wacom Intuos4 tablet was attached.  In fact the tablet didn’t seem to notice it was attached either.  The power LED lit, but nothing else showed.  I tried updating to the newest driver with no effect.  When I went into the Control Panel and tried to open the Wacom Tablet Properties I got a message “Tablet Driver was not Found”

After reading a number of forums that seemed similar issues, I finally found something that fixed it for me.  I went into the Devices and Printers and right clicked on the tablet device there.  I clicked on Tablet Preference File Utility and then under All User Preferences selected Remove.  Immediately the tablet returned to life and I was able to get back to photo editing.

Hope that helps anyone running into a similar issue (or myself if it happens again).

The Three Key Concepts –Shutter Speed, Aperture, and ISO

 

When it comes to photography, the most important element that you must master is light. I’ve heard photography referred to as painting with light. That is because the basic element of your image is exposure, the amount of light that falls on the film or image sensor when taking a photograph. It sounds like a simple concept, but as with most simple things there are complications. Today we are going to talk about the three basic elements that together make up exposure. The three elements are shutter speed, aperture, and ISO. Let’s take each of these individually first. Balancing these elements to achieve the results that you want in your photos will be a crucial skill in bringing your artistic vision to your photographs.

Shutter Speed

Shutter speed is simply how long the shutter is open and the film or image sensor is exposed to light. It should be obvious that the longer the shutter is open, the more light will reach the sensor and the brighter the image will be. The other effect of leaving the shutter open longer is that any motion by the subject will appear on the final image. This can sometimes be a desirable effect. For example when photographing a waterfall you will often want the movement of the water over the falls to show on the image and this can be achieved by lengthening the time the shutter is open. In general fast shutter speeds freeze motion while a slow shutter speed will blur motion.

Shutter speeds are expressed in a fraction of seconds. A digital SLR camera will normally show only the bottom part of the fraction. For example a shutter speed of 1/200 of a second, meaning the shutter is open for one two hundredth of a second, will usually show on the camera as 200. Times greater than or equal to one second will normally show the number or seconds along with an indicator, often an s, to show that it should be seen as seconds and not a fraction of a second. A change in the shutter speed that either doubles (for example changing from 1/200 to 1/100) or halves it (changing from 1/200 to 1/400) will double or halve the amount of light that reaches the sensor respectively. This change is often referred to as a stop.

The biggest problem that can occur with longer shutter speeds is camera shake, where the movement of the camera causes the image to blur. It takes surprisingly little movement to introduce a blur into the image. A good rule is that with a steady hand you can generally use an exposure of 1 over the focal length of the lens or shorter without worrying about camera shake. With image stabilization on the camera or lens or developing a way to steady your hand, you can often get away with a longer exposure than that rule would indicate. For very long exposures a tripod can provide a stable camera platform.

Most cameras have a mode call shutter priority mode that allows you to set a desired shutter speed and the camera will determine the aperture to provide a proper exposure.

Aperture

Where shutter speed determines how long light is allowed to reach the sensor or film, aperture is how large the opening light comes through is set. As you might guess the larger the aperture, the brighter the image with the shutter speed and ISO set the same as more light will be allowed in to the image.

The effect of aperture on an image is to control the depth of field, or how much of your image is in focus. You can think of depth of field as the distance in front of and behind the point of focus or focal point of your image that will be in focus. A larger aperture will have a smaller depth of field than a smaller aperture. So the larger your aperture, the more of the image will be in focus. Commonly in portrait photography, the aperture is set to be large so the subject is in focus and the background will be softly blurred. In a landscape image you would normally want a small aperture so the entire landscape is sharp and crisp.

Aperture is expressed in terms of f-stops such as f/2, f/4, etc. Again as with shutter speed most cameras only show the number so that f/2 will be shown by the camera as 2 and f/22 will be shown by the camera as 22. When determining if you have a large or small aperture, remember that these are fractions so an aperture of f/2 (shown on the camera as 2) will actually be larger than an aperture of f/4 (shown on the camera as 4). Moving from one aperture (such as f/4) to the next (such as f/5.6) is referred to as one stop. Note that a stop is not quite a simple doubling or halving of the number as it is with shutter speed (and ISO to come). A list of the full stops you’ll encounter most are:

f/2 f/2.8 f/4 f/5.6 f/8 f/11 f/16 f/22 f/32

Moving from one of these to the next is a full stop. Many camera lenses will have settings between these full stop values that are either ½ or 1/3 of a stop each. For example the lens I have on my camera right now gives me these aperture options:

f/4.5 f/5 f/5.6 f/6.3 f/7.1 f/8 f/9 f/10 f/11 f/13 f/14 f/16 f/18 f/20 f/22 f/25 f/29

Each lens will have a range of f-stops that it is capable of providing. The minimum and maximum apertures the lens is capable of will normally be printed on it or in the documentation with the lens. You will often hear the terms fast and slow to describe a lens. This is in reference to the maximum aperture of the lens. A lens with a maximum aperture of f/8 is slower than one with a maximum aperture of f/4.5.

Most cameras have a mode that allows you to set the aperture to a desired value and the camera will calculate the appropriate shutter speed to produce a correct exposure.

ISO

ISO is how sensitive that your film or sensor is to light. This is measured as ISO or ISO equivalent for digital cameras. The normal ISO for outside on a sunny day is 100. A doubling scale is used with ISO and most digital cameras will start at ISO 100 and go up from there. Increasing the ISO will produce a brighter image with the shutter speed and aperture left constant.

Most digital cameras produce the best quality image at their lowest ISO setting. As you increase the ISO you will begin to introduce unwanted noise into the image. This noise will usually appear in a digital image as a multicolor grain or dots in the image. Some sensors will see more noise than others, but as ISO increases an increase in noise is unavoidable. Most modern digital cameras can produce acceptable images even at higher ISO values. If quality of the image is most important, then you want to use the lowest ISO value that you can.

Now that we’ve discussed the three basic concepts, next time we will discuss more how they relate with the idea of exposure and how to use them together to get the images that you want.

Advice for Beginners Series … Begins

Recently I had someone ask me for advice about buying a new camera.  They were looking for something more advanced than the point and shoot model they’d had in the past and wanted a more advanced digital SLR camera.  While they have no interest in using it for the same type of photography that I do, it brought to mind something that I’d first considered back when I worked with Melissa in late March.  Working with her again almost four years after our first shoot gave me a chance to consider some of the things that I’d learned between the two shoots.  So I’m beginning a series of posts today written for anyone thinking about or just starting to do nude photography.  I hope to cover equipment, basic concepts, locations, finding models, working with models, and some tips and ideas to get started.  My goal is not to cover every detail or concept about creating great nude photos, but to share some tips and advice from what I’ve learned over the last four years.  Basically these are the things that I wish I’d known back when I first started.

In this first post we’ll start with equipment.  This will be a short one because to be honest equipment doesn’t matter as much as most people think.  I say that as someone who will spend hours researching any technology related purchase. There are basically two types of cameras.  The first types consists of point and shoot models that are mainly designed for simple operation.  They make most of the decisions for you and are often very compact.  These are great for the types of photos that most people want to make.  That is quick shots to capture memories with friends and family.  The second type is the SLR or single lens reflex camera named for the mirror system that directs light from the lens to either the viewfinder or image sensor/film.  When the camera uses an image sensor instead of film, they are usually referred to as digital SLR or DSLR cameras.  The first obvious difference of the DSLR from the point and shoot is that the DSLR camera will be larger.  It also features interchangeable lenses that can be changed depending on the type of photos being taken.  They also normally offer much greater control when taking the photo.  The other big advantage is that what you see through the viewfinder is exactly what photo you will take.  Many DSLR cameras also offer a way to preview effects such as depth of field that will be seen on the final photo which is critical in certain types of photography.  You may have guessed that you’ll want the control and features that a DSLR offers for any kind of advanced photography.  Artistic nude photography in particular often needs careful lighting and control that only a DSLR can provide.

There are many brands of good cameras and other equipment out there and I’m not going to get into what brand is better because ultimately it doesn’t matter as much as most people think.  You can go out and buy the same guitar and amplifier as Eddie Van Halen or Stevie Ray Vaughn, but when you play it’s still going to sound like you playing the guitar. Likewise you can buy the exact same camera gear as your photography hero, but you will be the one taking the photos. You need to know and learn how to get the most out of your equipment. Technical ability is the start, not the end of producing work that you’re proud of showing to others.

As I stated, you’ll want the control and extra functionality that a DSLR offers, but don’t feel that you need to buy the top of the line pro model and a dozen different lenses before you take a single photo. Start small and keep things affordable.  Photography equipment can be expensive and it’s easy to spend a lot of money very quickly if you’re not careful.  By starting small you can learn your equipment and when you start to hit the limitations of the equipment that you have, you’ll know it’s time look at an upgrade.  A couple of sites that I like and use when considering new purchases are Digital Photography Review and Digital Camera Resource Page.  Reading a number of sites to get a variety of opinions will serve you well and before buying any camera you should definitely hold it in your hands to make sure you like how it feels and can work the buttons and controls easily.

And just for the record, I use a Canon camera.

Once you have a camera, you will likely want at least one light.  Natural light and sunlight can go a long way (and for some things may be all that you need), most photographers of the nude will want at least one flash.  Again starting small with a single light is a good path to take. For good examples and demonstrations of what can be done with just one flash, check out Strobist.  The Lighting 101 article there is a great place to start, but ultimately you will need to learn lighting by practice and experimentation.  Learn to use one light and use it well before you begin to buy or bring in more lights.

One other piece of equipment to consider is a light meter.  There is a lot of debate on whether you really need one given the digital camera’s ability to let you see results instantly on the back of the camera.  After a long time in that camp, I’ve recently started using a light meter in shooting and am finding it quite useful, especially when working with rapidly changing outdoor conditions and complex lighting effects.  I’ll discuss using a light meter in a later entry, but for now I’m going to suggest getting a light meter, but also state that you can get along without one for quite a while.

I’ve tried to suggest frugality in your equipment.  You do get what you pay for to a degree in photography equipment.  In most cases lenses, cameras, and lights that cost more do so because they have better quality or more features (though there are always exceptions).  That said, for a beginner, you probably don’t need many of these advanced features.  The key is to buy solid equipment when starting out, but to be smart about spending money.  Good reviews are your best route here as any advice I give today on models will be outdated next week.

In our next article in the series, we’ll discuss the three basic concepts of photography you must learn: ISO, aperture, and shutter speed.